Welcome to the Laboratory for Advanced Materials and Processes (LAMP)! The LAMP was officially launched in April 2022 in the Department of Aerospace Engineering at Korea Advanced Institute of Science and Technology (KAIST), Republic of Korea. The LAMP aims to illuminate our understanding of the underlying physics of advanced materials and their manufacturing processes. We explore next-generation manufacturing processes that are tailored to the heterogeneous nature of advanced materials. In addition, we intend to utilize these innovative manufacturing processes to develop and implement aerospace materials that were previously difficult to achieve with conventional processes.

저희 연구실 ‘LAMP’는 차세대 재료/구조 및 생산공정에 관심있는 모든 분들께 열려있습니다. 복합재료/구조에 대한 사전 지식은 도움이 될 수 있지만 연구에 있어 필수적이지 않습니다. 보다 중요한 점은 연구 주제에 대한 관심이며 그 정도가 현재 막연하여도 좋습니다. 연구 참여에 관심있는 분들은 jlee@kaist.ac.kr로 문의 바랍니다.

발사체를 위한 전복합재 압력용기 요소 기술 개발

Horizontally Aligned Cnt Nanocomposites: A Breakthrough in Bipolar Plate Technology for Vanadium Redox Flow Batteries

Impact of carbon nanotube length on electron transport in aligned carbon nanotube networks

Aligned carbon nanotube film enables thermally induced state transformations in layered polymeric materials

Advanced carbon fiber composite out-of-autoclave laminate manufacture via nanostructured out-of-oven conductive curing

Void‐free layered polymeric architectures via capillary‐action of nanoporous films

In situ synchrotron computed tomography study of nanoscale interlaminar reinforcement and thin-ply effects on damage progression in composite laminates

New interlaminar features and void distributions in advanced aerospace-grade composites revealed via automated algorithms using micro-computed tomography

Consolidation of aerospace-grade high-temperature thermoplastic carbon fiber composites via nano-engineered electrothermal heating

Actuation of bistable laminates by conductive polymer nanocomposites for use in thermal-mechanical aerosurface de-icing systems

Manufacturing autoclave-grade thermoset carbon fiber-reinforced polymer aerospace composites without an autoclave using nanoporous materials

Interlaminar reinforcement of carbon fiber reinforced polyimide composites using vertically aligned carbon nanotubes

High-volume-fraction textured carbon nanotube–bis (maleimide) and− epoxy matrix polymer nanocomposites: Implications for high-performance structural composites

Electronic packaging enhancement engineered by reducing the bonding temperature via modified cure cycles

Thermal properties of single-walled carbon nanotube forests with various volume fractions

Nanoengineered In Situ Cure Status Monitoring Technique Based on Carbon Nanotube Network

Low-defect fabrication of composite materials

Nanomaterial-enabled manufacturing for next-generation multifunctional advanced composite prepreg laminate architectures

Investigation of aligned conductive polymer nanocomposites for actuation of bistable laminates

Reducing bonding temperature and energy consumption in electronic packaging using flash electro-thermal carbon fiber heating elements

Building life-cycle enhancement multifunctionality into glass fiber reinforced composite laminates via hierarchical assemblies of aligned carbon nanotubes

Computational description of the geometry of aligned carbon nanotubes in polymer nanocomposites

Laboratory for Advanced Materials and Processes

교수님 소개

이전윤

연구실 소개

연구실 키워드

알럼나이가 간 회사

연구실 지원 방법

대우 조건

연도별 논문 인용수

저널 & 학회 논문 출판 수

연구실 논문 목록

발사체를 위한 전복합재 압력용기 요소 기술 개발

Horizontally Aligned Cnt Nanocomposites: A Breakthrough in Bipolar Plate Technology for Vanadium Redox Flow Batteries

연구실 보유 특허

대학별 입시끈

우리 연구실 모집

교수님 소개

이전윤

연구실 키워드

알럼나이가 간 회사

연구실 지원 방법

대우 조건

연도별 논문 인용수

저널 & 학회 논문 출판 수

연구실 논문 목록

발사체를 위한 전복합재 압력용기 요소 기술 개발

Horizontally Aligned Cnt Nanocomposites: A Breakthrough in Bipolar Plate Technology for Vanadium Redox Flow Batteries

연구실 보유 특허

최근 3년간 연구실적 높은 연구실

대학별 입시끈

우리 연구실 모집