The Intelligent Semiconductor Discovery Laboratory (ISDLab) at Sungkyunkwan University focuses on advanced research in materials science and engineering. Key research areas include materials for photoelectrochemical cells, next-generation electronics, and catalysts for environmental issues. The lab is involved in various projects, such as the development of body-implantable neurostimulation platforms, stretchable display technologies, high-efficiency photoelectrode materials, and novel memory devices.

성균관대학교 지능형반도체소재연구실(ISDLab)은 재료 과학 및 공학 분야의 첨단 연구에 중점을 둡니다. 주요 연구 분야에는 광전기화학 전지용 재료, 차세대 전자 장치 및 환경 문제 해결을 위한 촉매가 포함됩니다. 이 연구실은 신체 이식형 신경 자극 플랫폼 개발, 신축성 디스플레이 기술, 고효율 광전극 재료 및 신개념 메모리 장치와 같은 다양한 프로젝트에 참여하고 있습니다.

Overcoming durability limit of SOEC stacks through controlled mass transfer for cell degradation mitigation

Early hydrogen gas detection as a predictive strategy for thermal runaway mitigation in lithium-ion batteries under variable heating conditions

Comparative performance analysis of hydrogen-, methane-, and ammonia-fueled solid oxide fuel cell systems considering anode off-gas recirculation

Intermediate-temperature direct ammonia solid oxide fuel cell engineered by surface modification with cobalt and gadolinium-doped ceria

Modeling lithium methyl carbonate decomposition kinetics in the lithium-ion battery SEI under thermal runaway

Large-scale protonic ceramic electrochemical cells fabricated by inkjet printing

Elucidating the proton-coupled oxygen reduction pathway in protonic ceramic fuel cells

Achieving energy autonomy in smart farm systems through renewable thermal energy: A scenario-based environmental and economic assessment

Dynamic polarization behavior in a commercial-scale pouch-type lithium-ion battery examined by a three-dimensional electrochemical-thermal modeling framework

Alloying Cu, Fe, and Co in Ni/YSZ electrodes for high-temperature CO2 electrolysis: Impact on TPB density, activity, and carbon deposition resistance

A charger-free electrostatic precipitator for collecting triboelectrically charged brake wear particles

Catastrophic degradation in solid oxide fuel cells caused by air supply interruption in real-world operations: Fundamental mechanisms and mitigation strategies

Flameless combustion characteristics using representative pyrolysis gas derived from plastic waste via the Hamburg process

Thermodynamic analysis of internal and external ammonia decomposition strategies for ammonia-fueled solid oxide fuel cell systems

Scenario-based profitability analysis of a commercial biomethane-based hydrogen refueling station using practical operational data

Primary exothermic reaction pathways between solid electrolyte interphases and electrolytes during the onset of thermal runaway in lithium-ion batteries

Medium-Entropy Alloy/Oxide Nano Composite for High-Performing High-Temperature CO2 Electrolysis with Remarkable Carbon Deposition Resistance

Analysis of the thermal behavior of a large format lithium-ion battery cell in a constant-power discharge process

Electrochemical–Thermal Correlation for Assessing Potential Thermal Runaway in Automotive Pouch Cells via 3D Numerical Simulations

Ni-based alloy catalysts for cost-effective hydrogen production from ammonia decomposition

Mechanistic Analysis of Lithium Ethylene Monocarbonate Decomposition Reaction in Battery Thermal Runaway

The effect of internal manifold configuration on thermal and electrochemical distributions in commercial scale solid oxide fuel cell stacks fueled by hydrogen and hydrocarbon

Analysis of electrochemical degradation phenomena of a 60-cell SOC stack operated in reversible SOFC/SOEC cycling mode

Contactless external manifold design of a kW-scale solid oxide electrolysis cell stack and analysis of its impact on the internal stack environment

Controlling the internal pressure drops of a kW-scale solid oxide electrolysis cell stack for the uniformity of flow distribution and reaction environment

Significant Suppression of Exothermic Heat Flow in Silicon Anodes Via In-Situ Polymerization of Phosphonium Ionic Liquids

Enhancing uniformity and performance in SOFCs with double symmetry interconnect design

In Situ Synthesis of Cobalt-Embedded Gadolinia-Doped Ceria Nanocatalysts for High-Temperature Solid Oxide Cells

Designing the Solid Oxide Electrochemical Cell for Superior Thermal Shock Resistance

Parametric evaluation of the operating conditions for NO reduction in flameless combustion of an H2/NH3/N2 fuel mixture

Thermal decomposition mechanism of lithium methyl carbonate in solid electrolyte interphase layer of lithium-ion battery

Assessment of energy self-sufficiency of a smart farm through integrated modeling of air-source heat pumps and solar power generation

Dehydration kinetics of the synthesis of high-nickel cathode materials used in lithium ion batteries

Elucidating the dynamic transport phenomena of solid oxide fuel cells according to rapid electrical load change operation

Engineering the heterogeneous catalyst of protonic ceramic electrochemical cells for CO2/H2O co-electrolysis

Characteristics of combustion and ash deposition for pulverized coal combustion under various thermal loads: An experimental study in an 80 kWth combustion system

Highly Efficient, Coke-Free Electrolysis of Dry CO2 in Solid Oxide Electrolysis Cells

Electrochemical performance analysis of a commercial-scale planar solid oxide fuel cell stack and its sensitivity to operating parameters

Effective diffusional limitation modeling of a heterogeneous reaction system for computational fluid dynamics application

Direct methane protonic ceramic fuel cells with self-assembled Ni-Rh bimetallic catalyst

Analysis of Electrochemical Degradation Phenomena of SOC Stacks Operated in Reversible SOFC/SOEC Cycling Mode

Atomically Dispersed Platinum Electrocatalysts Supported on Ceria Nanoparticles for Practical High-Temperature Solid Oxide Cells

Versatile thermodynamic design of a solid oxide electrolysis cell system and its sensitivity to operating conditions

Reaction mechanism study and modeling of thermal runaway inside a high nickel-based lithium-ion battery through component combination analysis

Optimal method for the anode exhaust gas recycling of atmospheric solid oxide fuel cell-combined heat and power systems

Elucidating the sensitivity to key operating parameters of a commercial-scale solid oxide fuel cell stack with open cathode manifolds

Carbon-neutral conversion of methane supported by Ni-(Rh, Co) bimetallic catalysts for low-temperature proton-conducting ceramic fuel cells

A review of solid oxide steam-electrolysis cell systems: thermodynamics and thermal integration

A comprehensive investigation of direct ammonia-fueled thin-film solid-oxide fuel cells: Performance, limitation, and prospects

Enhancement of surface morphology and catalytic kinetics of NiAl2O4 spinel-derived Ni catalyst to promote dry reforming of methane at low temperature for the direct application to a solid oxide fuel cell

Construction of high-temperature electronic conduction paths for the scale-up of solid oxide fuel cell technology

Comparative evaluation of Ni-based bimetallic catalysts for dry reforming of methane at low temperature: the effect of alloy itself on performance

Sensitivity analysis of a solid oxide co-electrolysis cell system with respect to its key operating parameters and optimization with its performance map

A novel interconnect design for thermal management of a commercial-scale planar solid oxide fuel cell stack

Operational guidelines for a residential solid oxide fuel cell-combined heat and power system with an optimal system layout design

Hybrid diagnosis method for initial faults of air supply systems in proton exchange membrane fuel cells

Thermodynamic analysis of the 2nd generation pressurized fluidized-bed combustion cycle utilizing an oxy-coal boiler and a gasifier

Ni-based bimetallic nano-catalysts anchored on BaZr0.4Ce0.4Y0.1Yb0.1O3 for internal steam reforming of methane in a low-temperature proton-conducting ceramic fuel cell

Low-temperature processing technique of Ruddlesden-Popper cathode for high performance solid oxide fuel cells

Thermodynamic analysis of a solid oxide co-electrolysis cell system for its optimal thermal integration with external heat supply

Highly active and thermally stable single-atom catalysts for high-temperature electrochemical devices

Thermal analysis of a 1-kW hydrogen-fueled solid oxide fuel cell stack by three-dimensional numerical simulation

1D thermodynamic modeling for a solid oxide fuel cell stack and parametric study for its optimal operating conditions

The effect of anode microstructure and fuel utilization on current relaxation and concentration polarization of solid oxide fuel cell under electrical load change

Comparative study of solid oxide fuel cell-combined heat and power system designs for optimal thermal integration

Effect of Fe infiltration to Ni/YSZ solid-oxide-cell fuel-electrode on steam/CO2 co-electrolysis

Key characteristics of a hydrocarbon-fueled solid oxide fuel cell examined by local thermodynamic states

Three-dimensional dynamic modeling and transport analysis of solid oxide fuel cells under electrical load change

High-temperature electrolysis of CO2-enriched mixtures by using fuel-electrode supported La0.6Sr0.4CoO3/YSZ/Ni-YSZ solid oxide cells

Long-term stability for co-electrolysis of CO2/steam assisted by catalyst-infiltrated solid oxide cells

Highly durable solid oxide fuel cells: suppressing chemical degradation via rational design of a diffusion-blocking layer

Degradation of anode-supported solid oxide fuel cells under load trip and cycle conditions and their degradation prevention operating logic

Significant Suppression of Exothermic Heat Flow in Silicon Anodes via In-Situ Polymerization of Phosphonium Ionic Liquids

In situ synthesis of cobalt-embedded gadolinia-doped ceria nanocatalysts for high-temperature solid oxide cells

조형균

Professor

Han-Ki Kim

Intelligent Semiconductor Discovery Laboratory (ISDLab)

교수님 소개

조형균

연구실 소개

연구실 키워드

알럼나이가 간 회사

연구실 지원 방법

대우 조건

연도별 논문 인용수

저널 & 학회 논문 출판 수

연구실 논문 목록

Overcoming durability limit of SOEC stacks through controlled mass transfer for cell degradation mitigation

Early hydrogen gas detection as a predictive strategy for thermal runaway mitigation in lithium-ion batteries under variable heating conditions

Comparative performance analysis of hydrogen-, methane-, and ammonia-fueled solid oxide fuel cell systems considering anode off-gas recirculation

연구실 보유 특허

대학별 입시끈

우리 연구실 모집

교수님 소개

조형균

연구실 키워드

알럼나이가 간 회사

연구실 지원 방법

대우 조건

연도별 논문 인용수

저널 & 학회 논문 출판 수

연구실 논문 목록

Overcoming durability limit of SOEC stacks through controlled mass transfer for cell degradation mitigation

Early hydrogen gas detection as a predictive strategy for thermal runaway mitigation in lithium-ion batteries under variable heating conditions

Comparative performance analysis of hydrogen-, methane-, and ammonia-fueled solid oxide fuel cell systems considering anode off-gas recirculation

연구실 보유 특허

최근 3년간 연구실적 높은 연구실

대학별 입시끈

우리 연구실 모집