이주원

김지현

모규민

주영민

최윤석

정임태

최현훈

김상호

조백현

성민준

김현서

최근원

URUNO YUMI

이승미

차병준

To implement a carbon-neutral society, we aim to proactively respond to climate change and lead core technologies for a sustainable society, based on original technologies including eco-friendly, high-efficiency energy conversion/storage/transport systems, power/propulsion technologies, and the utilization of marine renewable energy (wind/solar/tidal) and large-capacity energy storage technologies.

탄소중립사회를 구현하기 위한 친환경 고효율 에너지 변환/저장/수송 시스템 및 동력/추진 기술, 해양 재생에너지(풍력/태양광/조력) 활용 및 대용량 에너지 저장 기술 등을 포함한 원천기술을 바탕으로 기후변화를 선제적으로 대응하고, 지속 가능한 사회로의 핵심 기술을 선도하고자 한다.

Numerical study on particle behavior in a Y-junction mixer for supercritical water hydrolysis

Three-dimensional simulation of droplet breakup and evaporation in attemperator

Control of Particle Size in Flame Spray Pyrolysis of Tb–doped Y2O3 for Bio-Imaging

Investigation of the Synergistic Effect of Sonolysis and Photocatalysis of Titanium Dioxide for Organic Dye Degradation

Experimental study on splash phenomena of liquid jet impinging on a vertical wall

Transient analysis of attemperator enthalpy balance based on the commissioning data of a coal-fired steam power plant

Optimization of pulsed voltage waveform for electrohydrodynamic jetting on-demand

One-dimensional simulation for attemperator based on commissioning data of coal-fired steam power plant

Effects of geometry and operating conditions on hydrogen productivity of a fuel cell reformer

Modeling of sessile droplet oscillation on electrohydrodynamic jetting nozzle at constant back pressure

Resonant oscillation phenomena of a sessile droplet on electrohydrodynamic jetting nozzle

Nanosecond laser ablation of silver nanoparticle film

Time resolved imaging of electrohydrodynamic jetting on demand induced by square pulse voltage

Deposit Pattern of Inkjet Printed Pico-liter Droplet

Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication

Onset condition of pulsating cone-jet mode of electrohydrodynamic jetting for plane, hole, and pin type electrodes

Assembly of Acircular SnO2 Rod using Optical Tweezers and Laser Curing of Metal Nanoparticles

Manipulation of Nano Devices with Optical Tweezers

Evaporation of Inkjet Printed Pico-liter Droplet on Heated Substrates with Different Thermal Conductivity

Experimental Study on Spreading and Evaporation of Inkjet Printed Pico-liter Droplet on a Heated Substrate

High resolution selective multilayer laser processing by nanosecond laser ablation of metal nanoparticle films

Fabrication of Multilayer Passive and Active Electric Components on Polymer using Inkjet Printing and Low Temperature Laser Processing

Nanosecond laser ablation of gold nanoparticle films

Damage-free Low Temperature Pulsed Laser Printing of Gold Nanoinks On Polymers

Compressible flow of liquid in standing wave tube

An experimental investigation of microresistor laser printing with gold nanoparticle-laden inks

In tandem deposition and sintering of printed gold nanoparticle inks induced by continuous Gaussian laser irradiation

Conductor microstructures by laser curing of printed gold nanoparticle ink

Manufacturing of nanoscale thickness gold lines by laser curing of a discretely deposited nanoparticle suspension

Infrared thermal velocimetry in MEMS-based fluidic devices

Infrared thermal velocimetry for nonintrusive flow measurement in silicon microfluidic devices

Microstructuring by printing and laser curing of nanoparticle solutions

Analysis of droplet evaporation by simulation of three-dimensional attemperator system

Transient analysis of enthalpy balance for attemperator based on commissioning data of coal-fired steam power plant

Simulation for attemperator in steampower plant

Electro-hydrodynamic oscillation and jetting on demand

Electro-hydrodynamic jetting on demand

Drop on demand electro-hydrodynamic printing induced by square pulse voltage signal and jetting at the resonant frequency using sinusoidal voltage signal

Resonant electrohydrodynamic jetting using sinusoidal voltage signal

Electrohydrodynamic jetting on demand using square pulse voltage

Electric Field Assisted Laser Induced Forward Transfer of Vapor

Drop on demand electrohydrodynamic jetting using various pulsed voltage signal

Resolution enhancement of EHD printing using hole-type electrode

Onset Voltage Conditions for Electrohydrodynamic Printing

Assembly of SnO2 Rod using Optical Tweezers and Laser Curing of Metal Nanoparticles

An experimental study of onset condition for electrohydrodynamic jetting

Evaporation of inkjet printed pico-liter droplet on heated substrates with different thermal conductivity

Sintering Characteristics of Surface Monolayer Protected Metal Nanoparticles

Sintering Characteristics of Alkanethiol Capped Gold Nanoparticles

Deposit pattern by evaporation of pico-liter droplet

Patterning microconductor using nanosecond laser ablation of metal nanoparticle film

Laser-assisted maskless fabrication of flexible electronics

Fabrication of multilayer passive electric components using inkjet printing and low temperature laser processing on polymer

Subtractive laser processing of low temperature inkjet printed micro electric components of functional nano-ink for flexible electronics

Fabrication of Inkjet Printed Flexible Electronics by Low Temperature Subtractive Laser Processing

Laser based hybrid inkjet printing of nanoink for flexible electronics

Heat Transfer and Phase Transformations in Pulsed Laser Melting and Crystallization of Thin Silicon Films

Double Laser Crystallization (DLC) of pre-patterned amorphous silicon film and amorphous silicon film with a patterned assisting SIO2 layer

Microconductors on polymer by printing nanoparticle ink and pulsed laser curing

Laser curing of gold nanoparticle inks

A microfluidic hydrogen generator for fuel cell applications

Transport in a microfluidic catalytic reactor

A methanol steam reforming microreactor for Proton Exchange Membrane micro fuel cell system

Micro-fabricated methanol/water reformers for small PEM fuel cells

Infrared Thermal Velocimetry

Capillary Pumped Loop Heat Spreader For Electronics Cooling

Analysis of Heat Transfer in an Electric Continuous Steel Plate Annealing Furnace

A Study on the Dynamic Characteristics of Phase Change Material Thermal Energy Storage System Using Simulation

Numerical Analysis of Spherical Phase Change Material Thermal Energy Storage System

Experimental Study on Wall Impingement Phenomena Due to Temperature Change of Spray Jet

CFD Study on Splash Phenomena Using VOF Model

Analysis of Actual Measurement Data and Simulation of Attemperator in Thermal Power Plant

열유체공학연구실

교수님 소개

정재원

연구실 소개

연구실 키워드

알럼나이가 간 회사

연구실 지원 방법

대우 조건

연도별 논문 인용수

저널 & 학회 논문 출판 수

연구실 논문 목록

Numerical study on particle behavior in a Y-junction mixer for supercritical water hydrolysis

Analysis of Heat Transfer in an Electric Continuous Steel Plate Annealing Furnace

A Study on the Dynamic Characteristics of Phase Change Material Thermal Energy Storage System Using Simulation

연구실 보유 특허

대학별 입시끈

우리 연구실 모집

교수님 소개

정재원

연구실 키워드

알럼나이가 간 회사

연구실 지원 방법

대우 조건

연도별 논문 인용수

저널 & 학회 논문 출판 수

연구실 논문 목록

Numerical study on particle behavior in a Y-junction mixer for supercritical water hydrolysis

Analysis of Heat Transfer in an Electric Continuous Steel Plate Annealing Furnace

A Study on the Dynamic Characteristics of Phase Change Material Thermal Energy Storage System Using Simulation

연구실 보유 특허

최근 3년간 연구실적 높은 연구실

대학별 입시끈

우리 연구실 모집